You must select the correct port into which you attached the HME IStation device on the site controller and enter the cap code prefix. You obtain the three-digit cap code prefix from the base ID that appears when you reboot the HME IStation device.

To configure the pager requirements for Aloha Kitchen:

• With Kitchen selected in the product panel, select Maintenance > Hardware > Pager.
• Click the New drop-down arrow, select HME from the Type list box, and click OK.
  
• Select the port into which you attached the HME IStation on the site controller.
• Type the three-digit cap code prefix that appears in the display on the HME IStation device.
• Leave the default value of '3' for 'Beep type.'
• Click Save and exit the Pager function.