The following are troubleshooting tips provided for Print Designer:

Nothing Prints for an Element

If nothing prints for an element from your layout, this could be caused by several reasons. The Print Designer tool is only the ‘face’ of your printing configuration. It does not enable or disable features. If an element did not print before you implemented Print Designer, it will probably not print after implementing Print Designer. Try the following troubleshooting tips, if nothing prints for an element:

• Ensure the element exists on the Print Designer layout in use.
• If the element has required options, ensure these are enabled, such as options located in Store Settings or Printer Maintenance. This is explained in detail in Required configuration for Print Designer.

The Chit Runs Too Long

If the chit runs too long when printing, consider the following:

• Remove any unused elements from the layout.
• Suppress any linefeeds that print as blank line entries on the layout. Refer to “Suppressing linefeeds (all layouts)” on page 26 for more information.

Return to the main Print Designer page.